1. Go to http://www.OZ Tuner - EFILIVE.com/ and
download the latest version of the OZ Tuner - EFILIVE version 8 Scan and Tune
Software
2. Connect the AutoCal to the computer via the
supplied USB cable
3. Double-click on the EFI Explorer desktop icon
to open the OZ Tuner - EFILIVE
Explorer computer program on your PC.
NOTE:
You must have OZ Tuner - EFILIVE v8.1 installed to use the OZ Tuner - EFILIVE
Explorer program. See the “Downloading OZ Tuner - EFILIVE Version 8
Software/Update” section in these instructions for information on where to
download the newest software and updates.
4.
When an OZ Tuner - EFILIVE AutoCal is connected to the PC, the AutoCal folder
tree should be populated (shown in picture below) and there should be a green
checkmark covering the device in the bottom right corner of the screen.
5.
The illustration below shows the lower half of the OZ Tuner - EFILIVE Explorer
home screen. With the AutoCal already connected to the computer, the program
will automatically open the contents of the OZ Tuner - EFILIVE AutoCal, as
shown by the red arrow below.
Installing and Removing Calibrations to and
from AutoCal
1.
The OZ Tuner - EFILIVE Explorer allows the user to manage the files stored in
the internal memory of the AutoCal.
2.
To install a tuned calibration from ID via E-mail attachment, download the
calibration and save it to a folder. Make sure to keep track of which folder
you save the calibration in.
3.
Inside the OZ Tuner - EFILIVE Explorer program, select the folder that you
saved the calibration in from the windows explorer window (top left window
pane)
4.
In the window directly to the right of the windows explorer window (top right
window pane), any available calibration files will be shown. Click on the
desired calibration file(s) and drag them down to the “Tune” folder in the
AutoCal explorer window (bottom left window pane). Upon opening the “Tune”
folder, the calibration file(s) should now appear in the adjacent window
(labeled as #4).
5.
If you want to remove a calibration file from the AutoCal device, right-click
the calibration file and select “Copy” to copy the file to a different location
on the computer and then right-click on the file in the “Tune” folder and
select “delete”.
6.
The AutoCal can be disconnected at this time. The calibration file is now saved
on the AutoCal device.
NOTE:
If you get an error while attempting to add a file to the AutoCal, too many
files (calibrations and/or data logs) are currently saved on the AutoCal, so
you will need to remove files before adding the calibration to the AutoCal.
Using
your Autocal on the vehicle:
How
to read your stock program:
Plug
the Autocal into the vehicles OBD2 port
Turn
ignition on, but do not crank.
Scroll
down until you see “Read 1”
Click
ok – It will read stock file program
from the vehicle. It will let you know
to turn the ignition off and click ok.
Once
countdown completes, you are ready to flash your truck.
How
to flash a custom tune to your vehicle:
Turn
ignition on, but do not crank.
Once
you have downloaded your stock program, scroll until you see “FULL”
Click
on the “Full” option of your choice of tune
Choose
“Full 1 DSP5_ID”
Click
ok
It
will ask you to License ECU, click ok.
Wait
for download to complete, then turn ignition off, click ok and wait for
countdown to complete.
How
to Datalog with Autocal *BBx*
Scroll
down to “Select PIDs”. Click ok.
Click
ok to the letter/number combo that pops up.
Click
ok on “Record Data” to data log and send to us or “Display Data” to verify
information for yourself.
Click
ok and the time should pop up to show that you are recording.
Once
you are done recording, press ok, and it will stop recorded and save the log to
the device.
Many
of the options (PIDs) you see are the options that are available that will help
us diagnose any issues you may be having with your truck.
To
Verify DSP5 Voltage
Scroll
down to “DSP5 Vol”. (as you switch your tunes, this voltage will drop. This
verifies that your switch is installed properly.)
To
Read and Clear Codes
Scroll
down to “Clear DTCs” to clear codes or “display DTCs” to read out any codes you
have.
Troubleshooting
basics:
Error
Code $0281 means there is no power to the Autocal, make sure your key is all
the way in the run position (not cranked). Also check cigarette lighter fuse.
The OBD port runs off of the same fuse. Replace the fuse and try it again. If
code continues to pop up, turn key off for 15 seconds, unplug Autocal, and
retry operation. If problem persist, please contact the dealer you purchased
the unit from and we will all work to resolve your issue.
No comments:
Post a Comment